收藏本站
μ PB1007K
NOTES ON CORRECT USE
(1) Observe precautions for handling because of electro-static sensitive devices.
(2) Form a ground pattern as widely as possible to minimize ground impedance (to prevent abnormal oscillation).
(3) Keep the wiring length of the ground pins as short as possible.
(4) Connect a bypass capacitor (example: 1 000 pF) to the V CC pin.
(5) High-frequency signal I/O pins must be coupled with the external circuit using a coupling capacitor.
RECOMMENDED SOLDERING CONDITIONS
This product should be soldered and mounted under the following recommended conditions.
methods and conditions other than those recommended below, contact your nearby sales office.
For soldering
Soldering Method
Soldering Conditions
Condition Symbol
Infrared Reflow
VPS
Wave Soldering
Peak temperature (package surface temperature)
Time at peak temperature
Time at temperature of 220 ° C or higher
Preheating time at 120 to 180 ° C
Maximum number of reflow processes
Maximum chlorine content of rosin flux (% mass)
Peak temperature (package surface temperature)
Time at temperature of 200 ° C or higher
Preheating time at 120 to 150 ° C
Maximum number of reflow processes
Maximum chlorine content of rosin flux (% mass)
Peak temperature (molten solder temperature)
Time at peak temperature
: 260 ° C or below
: 10 seconds or less
: 60 seconds or less
: 120 ± 30 seconds
: 3 times
: 0.2%(Wt.) or below
: 215 ° C or below
: 25 to 40 seconds
: 30 to 60 seconds
: 3 times
: 0.2%(Wt.) or below
: 260 ° C or below
: 10 seconds or less
IR260
VP215
WS260
Preheating temperature (package surface temperature) : 120 ° C or below
Maximum number of flow processes
Maximum chlorine content of rosin flux (% mass)
: 1 time
: 0.2%(Wt.) or below
Partial Heating
Peak temperature (pin temperature)
Soldering time (per side of device)
Maximum chlorine content of rosin flux (% mass)
: 350 ° C or below
: 3 seconds or less
: 0.2%(Wt.) or below
HS350
Caution Do not use different soldering methods together (except for partial heating).
Data Sheet PU10014EJ02V0DS
25
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
UPB1008K-EVAL EVAL BOARD FOR UPB1008K
UPB1009K-E1-A IC GPS RECEIVER LP 44-QFN
UPB1507GV-E1-A MMIC PRESCALER 3GHZ 8-SSOP
UPB1508GV-E1 MMIC PRESCALER 3GHZ 8-SSOP
UPB1509GV-E1 MMIC PRESCALER 1GHZ 8-SSOP
UPB1510GV-EVAL EVAL BOARD FOR UPB1510GV
UPB1513TU-E2-A MMIC PRESCALER 13GHZ 8-MINIMOLD
UPC1678GV-A MMIC AMP 2GHZ 8-SSOP
相关代理商/技术参数
UPB1008 制造商:NEC 制造商全称:NEC 功能描述:NECs LOW POWER GPS RF RECEIVER
UPB1008K 功能描述:射频接收器 RO 551-UPB1008K-A RoHS:否 制造商:Skyworks Solutions, Inc. 类型:GPS Receiver 封装 / 箱体:QFN-24 工作频率:4.092 MHz 工作电源电压:3.3 V 封装:Reel
UPB1008K-A 功能描述:射频接收器 GPS Receiver RoHS:否 制造商:Skyworks Solutions, Inc. 类型:GPS Receiver 封装 / 箱体:QFN-24 工作频率:4.092 MHz 工作电源电压:3.3 V 封装:Reel
UPB1008K-E1 制造商:California Eastern Laboratories (CEL) 功能描述:Silicon MMIC Receiver / GPS
UPB1008K-E1A 制造商:California Eastern Laboratories (CEL) 功能描述:GPS Receiver 1.575GMHz 3.3V 36-Pin QFN T/R
UPB1008K-E1-A 功能描述:射频接收器 GPS Receiver RoHS:否 制造商:Skyworks Solutions, Inc. 类型:GPS Receiver 封装 / 箱体:QFN-24 工作频率:4.092 MHz 工作电源电压:3.3 V 封装:Reel
UPB1008K-EVAL 功能描述:EVAL BOARD FOR UPB1008K RoHS:否 类别:RF/IF 和 RFID >> RF 评估和开发套件，板 系列:- 标准包装:1 系列:- 类型:GPS 接收器 频率:1575MHz 适用于相关产品:- 已供物品:模块 其它名称:SER3796
UPB1009K 功能描述:电信集成电路 RO 551-UPB1009K-A RoHS:否 制造商:STMicroelectronics 类型:Telecom IC - Various 工作电源电压:4.75 V to 5.25 V 电源电流: 工作温度范围:- 40 C to + 85 C 安装风格:SMD/SMT 封装 / 箱体:PQFP-100 封装:Tray